300W AI IoT Anti-Glare LED Tunnel Light HC-WT2-B300W
300W AI IoT Anti-Glare LED Tunnel Light HC-WT2-B300W
This AI IoT LED tunnel light combines adjustable brightness and color temperature with anti-glare optical lenses to suit changing weather and site conditions. Choose from one to four modules, with adjustable angles to direct light where needed. Powered by 220V AC, it uses Cree 3030 LEDs and a MEAN WELL or Werise custom driver. PC and mobile monitoring, fault alerts, and GPS location information help maintenance teams identify affected fixtures, reduce search time, and plan repairs.
Monitor tunnel lighting from your PC or phone. This 220V AI IoT LED tunnel light combines GPS location, adjustable brightness and color temperature, and remote fault diagnostics to simplify maintenance and help keep tunnel lighting suited to driving conditions.
AI IoT LED Tunnel Light with GPS and Fault Alerts
Receive fault alerts on your phone and identify the affected fixture using its device ID and available location information. GPS data and recorded installation positions help maintenance teams find faulty units and plan repairs. Remote alerts require power and network connectivity.
LED Tunnel Light with Cree 3030 LEDs
This LED tunnel light uses Cree 3030 LEDs with a chip efficacy of 200 lm/W for efficient light generation. Choose a MEAN WELL or Werise custom driver to match your project specifications and support dependable lighting in tunnels and underground passages.
Adjustable Color Temperature LED Tunnel Light
Adapt your tunnel lighting to changing weather and site conditions. This LED tunnel light uses dual-color LEDs to adjust between warm, neutral, and cool white, giving operators more control over lighting conditions without replacing fixtures when project needs change.
LED Tunnel Light with Anti-Glare Optical Lenses
This LED tunnel light uses optical lenses to control light distribution and reduce glare, helping drivers see the road more comfortably. Designed for tunnel lighting projects, it supports clearer visibility and helps reduce distracting brightness in the driver’s field of view.
300W LED Tunnel Light for Wider Coverage
This 300W LED tunnel light features three lighting modules, each combining two 50W LED sections horizontally. The extended design supports broader coverage, while adjustable module angles help direct light across the required areas.
Adjustable LED Tunnel Light for Flexible Coverage
Adjustable modules let you direct light where it is needed. This LED tunnel light adapts to different mounting positions and tunnel layouts, helping reduce poorly lit areas and making it easier to match lighting coverage to your project’s requirements.
Modular LED Tunnel Light for Flexible Projects
Choose from one to four modules to match your project’s lighting requirements. This modular LED tunnel light offers flexible configurations for tunnels and underground passages, helping you select the right fixture size and lighting output for different installation areas.
LED Tunnel Light Manufacturer for Project Needs
Our factory produces modular LED tunnel lights in configurations from one to four modules. With adjustable lighting angles, color temperature options, and driver choices, we help contractors match fixtures to project requirements and simplify sourcing for tunnels and underground passages.
Werise AI IoT Anti Glare LED Highway Tunnel Light
Nom de marque
se levait
Numéro de modèle
HC-WT2-B300W
Puissance de la lampe (W)
300 W
Tension d'entrée
Depends on selected driver; 220V AC operation supported.
Sortie du pilote
22-38V
Marque de puces
CREE 3030
Contrôle intelligent
Contrôle IoT par IA (Contrôle par PC et application, Marche/Arrêt et variation d'intensité à distance)
Matériau du boîtier
Aluminium moulé sous pression
Lentille
Lentille en polycarbonate
Angle du faisceau
80° × 90°
Efficacité lumineuse de la lampe (lm/W)
200lm/W
Flux lumineux de la lampe (lm)
50000~60000lm
Température de couleur
3000–6000K; adjustable via the AI IoT platform
luminosité réglable
Remote dimming via PC and mobile app
Indice de rendu des couleurs (Ra)
>80
Certification
CE, RoHS
Évaluation à vie
50 000 heures
Température de fonctionnement
-50°C à +60°C
Indice de protection IP
IP65
service de solutions d'éclairage
Conception d'éclairage et de circuits
Hauteur de montage recommandée
3-6m(Project Dependent)
Garantie
5 years; subject to warranty terms
Type de montage
Montage mural/plafond/support pour tunnel
Zone d'éclairage
Determined by mounting height, aiming, spacing, and target illuminance
Driver Options
MEAN WELL / Werise custom driver
Module Configuration
3 modules × 2 LED sections
Rated Power per LED Section
2*50W
Applications
Road tunnels, highway tunnels, urban underpasses, pedestrian passages, underground parking ramps, and industrial service corridors.
Tell Us About Your Tunnel Lighting Project
FAQ sur les lampes tunnel IA IoT
1. Can I adjust the brightness and color temperature of this LED tunnel light?
Yes. The AI IoT LED tunnel light supports adjustable brightness and color temperature, allowing you to adapt lighting to changing weather, operating conditions, and project requirements.
2. Can I monitor tunnel lights from my phone or computer?
Yes. You can check lighting status and review reported faults through the mobile or PC platform. Remote monitoring and control require a compatible system, power, and network connectivity.
3. How do GPS location and fault alerts help with maintenance?
Fault alerts help identify the affected fixture, while available GPS location information helps maintenance teams find it and plan repairs. GPS reception may be limited inside tunnels, so installation records and device IDs also help locate individual lights.
4. What module configurations are available?
The product range offers one to four lighting modules. The HC-WT2-B300W uses three modules, each containing two 50W LED sections, for a total rated power of 300W.
5. Can the lighting angle be adjusted after installation?
Yes. The adjustable modules allow installers to direct light toward the required areas. This helps match coverage to different mounting positions and tunnel layouts. Final aiming should follow the project’s lighting design.
6. How do the optical lenses help reduce glare?
The optical lenses control light distribution to help reduce distracting brightness in drivers’ field of view. Proper mounting, aiming, and brightness settings are also important for comfortable tunnel lighting.
7. What LEDs, drivers, and power supply does the light use?
The light uses Cree 3030 LEDs, with MEAN WELL or Werise custom driver options, and supports 220V AC power. The stated 200 lm/W refers to LED chip efficacy; complete fixture efficacy depends on the selected configuration and operating conditions.
Share your tunnel dimensions, mounting height, target lighting levels, and control requirements. We can help recommend a suitable configuration.
1. The short answer: one housing vs separate components
An all-in-one solar street light puts the panel, battery, LED and controller in a single housing. One unit goes up the pole, and the configuration is fixed — what you order is what you get.
A split solar street light keeps the parts separate: the light head, the solar panel and the battery box are individual components, each sized for the project. Werise’s street lights use separate components. HC-JDSL-02 is named a split system on its own product page. HC-CZSL-39 keeps its battery in a separate external battery box, plug-connected to the lamp body. HC-ZY-01 lists its panel and battery as separate components sized per model.
So the choice is not about which form is “better” in general. It is about how much the project needs to configure — power, panel, battery and pole height — and how the parts are put together on site. This guide compares both forms, then uses Werise’s split systems as the worked examples.
2. What a split system is (Werise HC-JDSL-02)
HC-JDSL-02 is Werise’s split solar street light, and its product page lists every part as a separate, configurable item:
Power models: 400W / 500W / 600W / 700W / 800W, configurable per project.
Solar panel: 18V, 100W / 120W / 150W / 180W / 200W.
Battery: 3.2V / 6.4V / 12.8V / 25.6V LiFePO4, capacity matched to lighting power, operating hours and local sunlight. The spec table lists 6.4V 50Ah up to 12.8V 50Ah by power model.
Controller: AI IoT MPPT control (PC & App, light & remote control).
Colour temperature: 3000K–6000K, adjustable via AI IoT control.
Mounting: pole or wall mounting; mounting height by power model per the spec table (8–13 m).
IP65, 180–210 lm/W, CREE / OSRAM LED, 50,000-hour lifespan, warranty 3–5 years depending on configuration.
The product page states the reason for the separate battery box directly: the external battery design makes inspection, maintenance and replacement more convenient. The panel, battery and LED power can each be configured to suit municipal roads, industrial parks and other outdoor applications.
3. What an all-in-one is
An all-in-one puts the panel, battery, LED and controller in one housing. There is one unit to mount and no wiring between components. The configuration is fixed at the factory: the panel size, battery capacity and LED power are set for that model, and the panel angle is fixed by the housing — so the bracket or arm direction sets the panel orientation, not a separate panel mount.
That form suits projects where the required power is modest and the configuration is standard: one unit, one mounting step, a clean look. Its limit is configurability. A bigger battery or a differently aimed panel means a different model, not a different configuration of the same model.
No Werise street-light model in this guide is presented as an all-in-one. Werise’s CZSL-39 and ZY-01 lines keep the battery as a separate component — CZSL-39’s battery is an external battery box — so a buyer comparing a true one-housing all-in-one against a Werise model should compare the battery arrangement, not just the wattage label.
4. The comparison
All-in-one
Split (Werise HC-JDSL-02)
What it is
Panel + battery + LED + controller in one housing
Head, panel and battery box as separate components
Panel
Fixed to the housing; angle set by the bracket/arm
Separate; 100–200W 18V, sized per project
Battery
Inside the housing, fixed capacity
External battery box; 3.2V / 6.4V / 12.8V / 25.6V LiFePO4, capacity matched to the project
Power range
Fixed per model
400–800W configurable (JDSL-02)
Controller
Varies by model
AI IoT MPPT (PC & App, light & remote control) on JDSL-02, CZSL-39 and ZY-01 — the controller is not the differentiator
Installation
One unit to mount
Three components to mount (head, panel, battery box)
Maintenance
Whole unit comes down for service
External battery box: inspection, maintenance and replacement more convenient (JDSL-02 product page); CZSL-39 battery box is plug-connected for easy maintenance and replacement
Rainy-day backup
Fixed by the model’s battery
Sized per project; CZSL-39 states up to 3 rainy days in dimmed mode — for JDSL-02 confirm before ordering
Werise’s fixed-pair models sit between the two forms in practice: HC-CZSL-39-150W pairs a 70W 18V panel with a 75Ah 3.2V LiFePO4 external battery box (150W, 27,000–30,000 lm, 6–8 m mounting, lighting area 30–50 m²); HC-CZSL-39-100W pairs a 60W 18V panel with a 60Ah 3.2V LiFePO4 external battery box (100W, 18,000–21,000 lm, 4–6 m mounting, lighting area 20–30 m²); HC-ZY-01 pairs panel and battery per power model from 25W to 80W (panel 18V 25–80W; battery 3.2V 20–80Ah; mounting 3–8 m by model). The panel and battery are matched per model, not configured freely — but the battery is still a separate external box, not sealed inside the housing.
5. Which one fits which project
Choose a split system (HC-JDSL-02) when the project needs the parts sized individually: higher power (400–800W), a larger battery, a panel aimed independently of the head, or taller poles. The Guangxi project in section 6 is that case — 12 m poles with two heads, two panels and two batteries per pole, a configuration no fixed unit carries.
Choose a fixed-pair model (HC-CZSL-39 or HC-ZY-01) when the project’s needs match a standard configuration: 100W or 150W with a matched panel and battery, 4–8 m mounting, and the external battery box arrangement. The panel and battery are already matched for the model, so the decision is which model, not which parts.
Choose a true all-in-one (market form) when the project wants the simplest install and the fixed configuration fits the road — and check two things before ordering: how the battery is accessed for service, and whether the fixed panel angle suits the site’s sun exposure. A panel facing the wrong way can lose a large part of its charge, and on an all-in-one the bracket or arm direction is what sets it.
Do not choose on wattage alone. Two “150W” lights can be an all-in-one with a fixed battery and a split system with a configured battery — different systems under the same label.
6. Worked example: a split system on a real project (Guangxi)
The Guangxi industrial access-road project used HC-JDSL-02 Custom AI IoT Split. The case page records: 12 m poles; two 200W LED heads per pole; two 160W monocrystalline panels and two 6.4V 100Ah batteries per pole; AI IoT MPPT controller. Actual operating power is 60W per head against the 200W rating, at 198 lm/W.
That is the split argument in one project: the heads, panels and batteries were each sized for 12 m poles on an industrial access road, and the battery bank per pole (two 6.4V 100Ah packs) is far larger than any single housing could carry. A fixed all-in-one could not be configured this way — the project would have needed a different model, not a different configuration.
7. What to send for a quote
The HC-CZSL-39-150W product-page FAQ states what Werise asks for: the project country/city, road or site dimensions, pole height and spacing, required operating hours, quantity and any special requirements. Add one line for this decision: whether the project needs a split system with configured parts, a fixed-pair model, or — if the site suits it — a true all-in-one form. If the inputs are not settled, Werise recommends from them; do not order on wattage alone.
Two commercial facts that affect planning: there is no MOQ — even a single unit can be customized — and lead time is 10–30 days (factory-confirmed 2026-11-14). Confirm the lead time for the exact configuration before ordering, because a custom battery or panel configuration is not a stock item.
8. FAQ
Q: Is Werise’s HC-CZSL-39 an all-in-one solar street light?A: No. Its battery is a separate external battery box, plug-connected to the lamp body — the product page states this directly. The panel is sized per model (60W 18V for the 100W model, 70W 18V for the 150W model). It is a separate-component design, not a single sealed housing.
Q: Can a split system use a bigger battery than an all-in-one?A: Yes. On HC-JDSL-02 the battery is configurable — 3.2V, 6.4V, 12.8V or 25.6V LiFePO4, capacity matched to lighting power, operating hours and local sunlight. On HC-CZSL-39 the battery is fixed per model (60Ah for 100W, 75Ah for 150W). Battery size is part of the configuration, so compare the battery, not just the wattage label.
Q: Does a split system take longer to install?A: Structurally, yes — the head, panel and battery box are three components to mount, against one unit for an all-in-one. Confirm the installation schedule per project before ordering; this guide states no minute or hour figure.
Q: Do both types use the same AI IoT controller?A: On Werise’s models, yes. HC-JDSL-02, HC-CZSL-39 and HC-ZY-01 all list the AI IoT MPPT controller with PC and App control, light and remote control. The controller is not what differs between the forms — the panel, battery and housing arrangement is.
Q: Which one should I choose for my road?A: It depends on power, battery, pole height and sun exposure, not on the form alone. Send the project country/city, road dimensions, pole height and spacing, required operating hours, quantity and any special requirements, and Werise will recommend the model and configuration. Do not order on wattage alone.
9. Links and CTA
Related reading: What are AI IoT solar street lights?, solar street light wattage guide, solar street light installation guide, solar street light price guide, how to choose solar street lights for municipal and rural roads, HC-JDSL-02, HC-CZSL-39-150W, HC-CZSL-39-100W, HC-ZY-01, Guangxi case and contact us.
Send your road width, pole height and hours per night — we will recommend the model and a lighting layout.
Section 1. The short answer: quoted per project, no fixed price
There is no fixed price list for a Werise solar street light, and this guide does not invent one. Every system is quoted per project, because the price depends on the full configuration — lamp, panel, battery, controller, pole height, quantity and customisation — not on wattage alone. A buyer who asks only “how much is a 100W solar street light” will get a useless answer, from any supplier, because two 100W lights can be entirely different systems. The rest of this guide explains what goes into the quote, so the reader can ask for the right one.
Section 2. The seven cost drivers
1. Wattage and lumens. Lumens are the light output; efficacy (lm/W) is lumens per watt. Cost follows the light output the project needs, not the wattage label. Two verified examples: HC-WT2-A50W is 50W at 180–210 lm/W, maximum 9,000–10,500 lm; HC-CZSL-39 is 150W, 27,000–30,000 lm. A higher-wattage light with low efficacy can cost more and light less than a lower-wattage light with high efficacy.
2. Panel and battery. The energy system is usually the largest cost block after the lamp itself. The panel must recharge the battery in local daylight; the battery must carry the light through the night and through cloudy days, in dimmed mode. Verified matched pairs from Werise product pages: HC-WT2-A50W, 20W 18V panel + 15Ah 3.2V LiFePO4; HC-CZSL-39-100W, 60W 18V panel + 60Ah 3.2V LiFePO4; HC-CZSL-39-150W, 70W 18V panel + 75Ah 3.2V LiFePO4. A bigger panel and battery cost more — and a system quoted with an undersized pair will cost more later, in failed nights.
3. Controller. The AI IoT MPPT controller (PC & App, light & remote control) is stated on the product pages of HC-CZSL-39, HC-CZSL-39-100W, HC-JDSL-02 and HC-WT2-A50W. It adds remote monitoring, batch on/off, dimming and colour-temperature control, GPS positioning and anti-theft on the models whose pages state those functions. Some Werise floodlights use Tuya control instead, over a 4G built-in chip (factory-confirmed 2026-11-14). Controller choice is a cost driver — do not compare an AI IoT quote with a basic-controller quote as if they were the same product.
4. Split vs all-in-one. In a split system the head, panel and battery box are separate components, and each can be sized and customised per project — HC-JDSL-02 is a split system with configurable power models (400–800W), panel 100–200W 18V and battery options of 3.2V, 6.4V, 12.8V or 25.6V LiFePO4. A split system costs more to configure and install than a fixed all-in-one, and it fits projects a fixed unit cannot. Do not price a split system against an all-in-one on wattage alone.
5. Pole height and mounting. Mounting heights from Werise product pages: HC-JDSL-02 at 8–13 m by power model; HC-CZSL-39-100W at 4–6 m; HC-CZSL-39-150W at 6–8 m; the two verified project cases use 12 m poles. Taller poles, dual-head configurations and wall-versus-pole mounting change the hardware and the installation — all of it belongs in the quote, not in the lamp price.
6. Quantity and customisation. There is no MOQ — even a single unit can be customized — and lead time is 10–30 days (factory-confirmed 2026-11-14). Quantity, custom battery or pole configurations and custom optics all move the unit price, so ask for a quantity-based quote for the exact configuration rather than comparing a single-unit price with a bulk price.
7. Shipping, installation and after-sales. Warranty is 3 years for the whole unit and 5 years for core components. Every light undergoes aging testing before shipment (HC-JDSL-02 product page). Shipping, installation and after-sales support are project costs — confirm what is included in the quote before ordering; this guide does not state freight or installation figures.
Section 3. Why wattage alone cannot price a light
Two verified Werise cases make the point. In Guangxi, HC-JDSL-02 heads are rated 200W per head but the case page records actual operating power of 60W per head. At Shenzhen Airport, HC-WT3-A200W heads are rated 200W with a configured operating power of 50W. The same “200W” label covers different energy systems, different battery banks and different operating schedules — so a price quoted on wattage alone is not a comparable price. Ask for the full spec: lamp power and lumens, panel, battery, controller, pole height, dimming schedule and warranty.
Section 4. Worked comparison — verified specs, no prices
Model
Lamp power
Lumens (max, where stated)
Solar panel
Battery
Controller
Mounting height
Warranty
HC-WT2-A50W
50W
9,000–10,500 lm
20W 18V mono
15Ah 3.2V LiFePO4
AI IoT MPPT (PC & App)
Confirm before ordering
3 years
HC-CZSL-39-100W
100W
18,000–21,000 lm
60W 18V mono
60Ah 3.2V LiFePO4
AI IoT MPPT (PC & App)
4–6 m
3 years
HC-CZSL-39 (150W)
150W
27,000–30,000 lm
70W 18V mono
75Ah 3.2V LiFePO4
AI IoT MPPT (PC & App)
6–8 m
3–5 years (by configuration)
HC-JDSL-02
400–800W (configurable)
Confirm before ordering
100–200W 18V (configurable)
3.2V / 6.4V / 12.8V / 25.6V LiFePO4 (configurable)
AI IoT MPPT (PC & App)
8–13 m (by power model)
3–5 years (by configuration)
Note: the HC-CZSL-39-100W lumen total is stated on its product page (18,000–21,000 lm). HC-WT2-A50W mounting height is not stated on its product page.
Section 5. What a like-for-like quote needs
The HC-CZSL-39-150W product-page FAQ states what Werise asks for: the project country/city, road or site dimensions, pole height and spacing, required operating hours, quantity and any special requirements. Send all of it. A quote built on wattage alone is not like-for-like with a quote built on the full spec, and the cheaper of the two is usually the one with the smaller panel, the smaller battery or the shorter warranty — the parts that fail first. Also state the operating pattern: Werise solar lights run 10–12 hours per night in time-segmented dimming mode, not at 100% brightness all night, with up to 3 rainy days of backup in dimmed mode (factory-confirmed 2026-11-14). A quote that assumes full power all night is pricing a different system.
Section 6. How to compare two quotes
Same panel wattage and battery capacity, or the comparison is void. Same controller — AI IoT MPPT with PC/App remote management is not the same product as a basic controller, and Tuya (4G built-in chip) is a third path. Same warranty: 3 years whole unit / 5 years core components, and check whether the quoted warranty is shorter. Same scope: does the price include poles, foundations, shipping and installation, or the lights only? Confirm before ordering. Same dimming schedule: 10–12 hours dimmed, up to 3 rainy days backup — or a different schedule with a different battery. Ask for the model number and the datasheet, not a wattage label. Two “100W solar street lights” can differ in every line of the table in section 4.
Section 7. FAQ
Q: How much does a solar street light cost?
A: Werise quotes per project — there is no fixed price list. Send the project country/city, road dimensions, pole height and spacing, required operating hours, quantity and any special requirements, and Werise will quote the exact configuration.
Q: Why do two 100W solar street lights cost different amounts?
A: Because watts are only the lamp rating. Panel size, battery capacity, controller, LED efficacy, pole height and warranty all differ between two “100W” lights — and those are what the price is mostly made of.
Q: Does a higher price mean a better light?
A: Not necessarily. Compare the full spec — lumens, panel, battery, controller, mounting height and warranty — not the wattage label and not the price alone.
Q: Is there a minimum order quantity?
A: No. There is no MOQ — even a single unit can be customized — and lead time is 10–30 days (factory-confirmed 2026-11-14). Ask for a quantity-based quote for the exact configuration.
Q: What information do I need to send for a quote?
A: Project country/city, road or site dimensions, pole height and spacing, required operating hours, quantity and any special requirements. If full technical data is not available, drawings, site photos or basic project information are enough to start.
Send your road width, pole height and hours per night — we will recommend the model and a lighting layout.
Section 1. What installation involves — and what it does not
A solar street light is an off-grid system: light head, solar panel, battery box, controller and pole. There is no power cable to run to the grid — the Shenzhen Airport case states the project required “solar-powered parking lot lighting without a grid power connection”. There is still a foundation to build for each pole, and the foundation specification depends on pole height and local conditions — confirm before ordering. The AI IoT part is the controller and the platform. The models used in this guide carry an AI IoT MPPT controller (PC & App, light & remote control), and the installation is not finished until the light is visible and controllable on that platform — not when the pole is up.
Section 2. Before anything is installed: the site survey
The survey decides the configuration. The HC-CZSL-39-150W product page FAQ puts it plainly: Werise normally evaluates the project location, road width, pole height, pole spacing, daily operating hours, required illumination level and local solar conditions, then recommends wattage, optics, solar panel and battery configuration. Send those inputs before the configuration is fixed — not after the poles are ordered.
Three survey items buyers most often skip:
Shading on the panel — the panel must stay uncovered and unshaded. A cover on the panel greatly reduces charging efficiency (stated on the HC-CZSL-39 product pages). Check trees, buildings and the pole’s own head for shading before fixing panel positions.
Hours per night and rainy-day backup — Werise solar lights run 10–12 hours per night in time-segmented dimming mode, not at 100% brightness all night, with up to 3 rainy days of backup in dimmed mode (factory-confirmed 2026-11-14). Settle the hours and the backup days in the survey, because they decide the panel and battery size.
What to send Werise — country/city, road or site dimensions, pole height and spacing, required operating hours, quantity and any special requirements (HC-CZSL-39 product-page FAQ). Drawings, site photos or basic project information work if full technical data is not available yet.
Section 3. Poles and mounting heights
Mounting height is set per project, from the model’s own range:
HC-CZSL-39 150W: 6–8 m mounting height (product page).
HC-JDSL-02: 8–13 m mounting height by power model (product page spec table: 400W 8–9 m, 500W 9–10 m, 600W 10–11 m, 700W 11–12 m, 800W 12–13 m).
HC-CZSL-39-100W: 4–6 m mounting height, pole or wall mounting.
Project poles run taller: both verified cases in this guide use 12 m poles — Guangxi industrial access road and Shenzhen Airport parking lot. Do NOT publish a generic pole-height-to-road-width rule, and do not copy a spacing figure from one model to another. The HC-ZY-01 product page shows a 6 m mounting height with 12 m pole spacing only as a reference configuration for that tested luminaire — it is not a general rule, and this guide does not repeat it as one. Spacing is set by a lighting calculation for the project.
Section 4. Panels and battery boxes (split systems)
In a split system the head, the panel and the battery box are separate components, so each is mounted and checked on its own. Panel and battery are matched per model — the pairs below are from each model’s own product page:
HC-WT2-A50W: 20W 18V mono panel + 15Ah 3.2V LiFePO4 external battery box.
HC-CZSL-39-100W: 60W 18V mono panel + 60Ah 3.2V LiFePO4 external battery box.
HC-CZSL-39-150W: 70W 18V mono panel + 75Ah 3.2V LiFePO4 external battery box.
HC-JDSL-02: configurable — panel 100–200W 18V; battery 3.2V, 6.4V, 12.8V or 25.6V LiFePO4, capacity matched to lighting power, operating hours and local sunlight.
The battery box is external on these models. Check its mounting and that it is protected from damage on site. All four models above are IP65 on their product pages. Do not swap a panel or battery between models — the pair is part of the configuration.
Section 5. Controller and app setup
The AI IoT MPPT controller (PC & App, light & remote control) is stated on the product pages of HC-CZSL-39, HC-CZSL-39-100W, HC-JDSL-02 and HC-WT2-A50W. Setup covers on/off, the time-segmented dimming schedule (10–12 hours per night, dimmed — factory-confirmed) and colour temperature, which is AI-adjustable per model: 3000K–6000K on HC-JDSL-02, HC-CZSL-39-100W and HC-WT2-A50W; 2300K–6000K on HC-CZSL-39-150W.
Two limits to keep straight:
Tuya models are a different control path: Tuya connects over a 4G built-in chip (factory-confirmed 2026-11-14). Do not describe a Tuya model as AI IoT, or an AI IoT model as Tuya.
Sensors are customised per project. There are no fixed detection distance, angle or delay figures — if the project needs sensors, confirm the configuration before ordering.
Section 6. Commissioning and the remote-monitoring check
Every light undergoes aging testing before shipment (HC-JDSL-02 product page). On site, commissioning is a platform check, not just a look at the pole. The definition post states the AI management system can monitor battery status, power generation and LED working status — so check all three for every light, plus:
batch on/off, dimming and colour-temperature adjustment work from the PC/App platform;
GPS position is recorded and the anti-theft function is active — GPS positioning and anti-theft are stated on the product pages of HC-CZSL-39, HC-JDSL-02 and HC-WT2-A50W. Do not claim GPS for a model whose page does not state it;
the dimming schedule is running as configured, not at full power all night.
Handover checklist:
each light visible on the platform;
battery, generation and LED status reporting;
dimming schedule running;
GPS position recorded;
remote on/off and dimming tested.
Accept handover only when the checklist passes for every light, not for a sample.
Section 7. Two real installations
Guangxi — industrial access road (HC-JDSL-02 Custom AI IoT Split). 12 m poles; two 200W LED heads per pole; two 160W monocrystalline panels and two 6.4V 100Ah batteries per pole; AI IoT MPPT controller. The case page records actual operating power of 60W per head against the 200W rating, and luminous efficacy of 198 lm/W. The lesson for buyers: rated watts and operating watts are different numbers, and the panel and battery per pole are part of the answer.
Shenzhen Airport — parking lot, 20,000 m² (HC-WT3-A200W). October 2026 project. 200W rated per head, 50W configured operating power; 6 × 100W monocrystalline panels per pole; 12 × 6.4V 60Ah battery packs per pole; 12 m poles. The case page notes the project required attention to glare and to electromagnetic compatibility for lighting and control equipment used near airport facilities. The lesson: a large site means a large battery bank per pole, and airport-adjacent projects carry checks — glare, interference — that a standard road project does not.
Section 8. What the factory supplies vs what the project provides
Confirm in the quote what is included: lights, panels, battery boxes and controller are the system. Poles, foundations and on-site labour are project items — confirm before ordering; this guide does not claim Werise supplies poles.
Two commercial facts that affect planning: there is no MOQ — even a single unit can be customized — and lead time is 10–30 days (factory-confirmed 2026-11-14). Confirm the lead time for the exact configuration before ordering, because a custom battery or pole configuration is not a stock item.
Section 9. FAQ
Q: How long does a solar street light installation take?
A: There is no fixed figure — it depends on the number of lights, pole height, site access and weather. Confirm the schedule per project before ordering.
Q: Does a solar street light need a grid connection or wiring?
A: No grid connection — the Shenzhen Airport case is solar-powered parking-lot lighting without a grid power connection. Remote monitoring runs through the cloud platform, so confirm the network path for the site before ordering.
Q: What should I check before accepting handover?
A: The checklist in section 6: each light visible on the platform; battery, generation and LED status reporting; dimming schedule running; GPS position recorded; remote on/off and dimming tested.
Q: Can the lights go on existing poles?
A: Mounting is per model — HC-CZSL-39-100W lists pole or wall mounting. Confirm the mounting method and the condition of existing poles for the exact model before ordering.
Q: What if a light stops working after installation?
A: Check the platform first — battery status, power generation and LED working status will usually show whether it is a battery, charging or LED problem. Warranty is 3 years for the whole unit and 5 years for core components. Then contact Werise with the light’s model and its platform status.
Send your road width, pole height and hours per night — we will recommend the model and a lighting layout.
Nous disposons d'un système de production et d'approvisionnement performant pour garantir un traitement rapide des commandes, des délais de livraison stables et des expéditions fiables. De la préparation des produits à l'emballage et à l'expédition à l'export, notre équipe suit un processus rigoureux afin d'aider nos clients à recevoir leurs luminaires dans les temps et à assurer le bon déroulement de leurs projets.
Nous proposons des services de personnalisation OEM et ODM pour diverses applications d'éclairage et exigences de projets. Nos clients peuvent personnaliser la puissance, la température de couleur, le design du boîtier, le système de contrôle, la configuration des panneaux solaires, la capacité de la batterie, l'emballage et la marque. Notre équipe d'ingénieurs accompagne le développement produit, de la conception à la production en série, en passant par le prototypage.
Nous proposons des solutions d'éclairage extérieur complètes pour les routes, les parcs, les places publiques, les zones industrielles, les installations sportives, les projets ruraux et les environnements non raccordés au réseau électrique. En fonction des spécificités de chaque projet, nous vous conseillons sur les produits d'éclairage, les plans d'installation, les configurations solaires et les options de contrôle les plus adaptés afin d'optimiser les performances, l'efficacité énergétique et la fiabilité à long terme de l'éclairage.