Werise Engineering Team Choosing a solar street light starts with the road, not the product. A municipal road and a rural village road need different mounting heights, different coverage, and different maintenance plans — even when the lights look similar. This guide explains how to choose, using Werise’s AI IoT solar street lights as the working example.
Werise is an AI IoT solar street light manufacturer in China, supplying solar street lights, solar flood lights and solar garden lights for commercial, industrial, municipal, residential, rural and community projects in 100+ countries.
Before comparing models, collect these project inputs:
Avoid starting with wattage alone. Wattage is only one part of a system that also includes the solar panel, the battery, the controller, and the mounting geometry.
Municipal roads usually need higher mounting, wider coverage, and a way to manage many lights as one portfolio.
What matters most here:
A worked example at the larger end of the range is the Shenzhen airport parking lot project (October 2026): HC-WT3-A200W flood lights, 200W rated per head with 50W configured operating power, 6 x 100W solar panels and 12 x 6.4V 60Ah battery packs per pole, on 12 m poles. That is a parking-lot / high-mast example, not a rural-road example — it shows how panel, battery, pole height, and remote management are sized together for a large site. Read the full case: Shenzhen Airport Parking Lot — 200W AI IoT Solar Flood Lighting
A mid-range road example is the HC-CZSL-39 smart city street light: 150W, 27,000–30,000 lm, CREE 3030 LEDs, IP65, 6–8 m mounting height, 10–12 hours per night in time-segmented dimming mode, with up to 3 rainy days of backup, described on its product page as ideal for roads, parks, rural communities, public areas, and remote projects. Those figures describe that model only. AI IoT Solar Street Light 150W HC-CZSL-39
Rural and village roads are often lower-traffic, harder to reach, and more dependent on the light working on its own for days at a time.
What matters most here:
For a rural road, send the road width, the mounting height you can use, and the required lit hours — those three inputs decide the shortlist faster than a catalogue browse.
AI IoT adds a management layer around the lighting asset. It should not be reduced to a timer or a remote-control handset. Before buying, confirm for the exact model:
Availability varies by model and must be confirmed per datasheet. The existing guide explains the system in more detail: Was sind KI-gestützte IoT-Solarstraßenlaternen? Technologien, Funktionen und Vorteile erklärt
| Road | Pole height (guide) | Example Werise model |
|---|---|---|
| Village path | 4–6 m | HC-JDSL-02 — split type, 4–6 m mounting height |
| Residential / community road | 4–5 m | HC-ZY-01 — 25–80W all-in-one |
| Municipal road | 6–8 m | HC-CZSL-39 150W — 27,000–30,000 lm, 10–12 hours per night in time-segmented dimming mode, up to 3 rainy days |
| Large site / parking lot | 12 m | HC-WT3-A200W — Shenzhen airport case: 200W rated, 50W configured operating power |
To get a lighting layout and a model recommendation, send:
Contact: send your project requirements via the inquiry form at werisesmartlighting.com/contact-us/.
Typical industry ranges are: This is called autonomy — the number of nights a light runs from a full battery with little or no sun. As a guide, 2–3 days suits dry climates, 4–5 days is standard for rainy or monsoon regions, and 5–7 days for engineered systems. The datasheet number only means something with the usable battery energy, nightly load and dimming profile stated: usable LiFePO4 energy is about 90% of nameplate, lead-acid only about 50%, and cold cuts usable capacity by about 10% near 0 °C and 25% below freezing. Under heavy overcast a panel still produces 10–25% of clear-day output. For reference, the Werise HC-CZSL-39 is rated for 10–12 hours per night in time-segmented dimming mode, up to 3 rainy days; confirm the autonomy figure for any other model before ordering. Treat these as planning ranges — the datasheet figure for your model is the one that goes into the contract.
As a guide: garden paths 3–4 m, residential driveways 4–5 m, small roads 5–6 m, parking lots 6–8 m, urban streets 8–10 m, highways 10–12 m. Spacing is roughly three times the mounting height — for example, a 5 m pole suits 12–15 m spacing, residential roads 25–30 m, parking areas 20–25 m, parks 15–20 m. Pole wall thickness is typically 2.5–4.0 mm by height, in hot-dip galvanised steel. Foundations: 3–6 m poles at least 0.8 m deep; 7–10 m at least 1.2 m; 12 m and above at least 1.5 m, in concrete of grade C25/C30 or better, cured 7–14 days before loading.
Face the equator — south in the northern hemisphere, north in the southern hemisphere. Tilt roughly equal to site latitude for year-round output; steeper by 10–15° if winter output matters most, flatter by 5–10° for summer peak. Even at the equator use at least 10–15° so rain cleans the glass. A panel facing the wrong way can lose about 50% of charge, and mounting flat against a pole can cut charge by about 30%. Check with a compass (correct for magnetic vs true north) and an inclinometer, not by eye. All-in-one lights have a fixed panel angle, so the bracket or arm direction sets orientation — plan arm direction for the sun, not just the road.
Choose grid LED where mains power exists, illuminance requirements are high, and the road matters — arterials, junctions, tunnel portals. Choose off-grid solar where there is no mains supply, trenching is expensive, or illuminance needs are moderate — rural roads, campus and park paths, new district service roads. Solar costs more per pole upfront, needs no trenching or cabling, and has no electricity bill, but the battery is a consumable and output varies with weather and winter. Grid LED costs less upfront and gives constant dimmable output, but needs trenching and ongoing electricity. Do not compare unit price alone — compare power availability, lighting class and rainy-day autonomy.
All-in-one (panel, battery and LED in one housing): 15–30 minute install, no wiring, lower theft risk, cleaner look, 2–5 rainy days of autonomy, practical up to about 120–200W. Split (separate panel and battery): flexible panel orientation, larger battery, 5–10+ days autonomy, higher power (200W and above), easier per-component replacement — but 2–4 hours to install, more wiring, and a ground-level battery box is a theft risk. Rule: below 120W and want speed, choose all-in-one; above 200W, long rainy seasons or harsh winters, choose split. Werise sells both: the HC-JDSL-02 is a split type with an external LiFePO4 battery box, while the HC-ZY-01 and HC-CZSL-39 are all-in-one.